Cisco 350-601 dumps updated and released 470 latest exam questions and answers, in line with preparing for the 350-601 DCCOR certification exam!
Use Cisco 350-601 dumps with PDF and VCE: https://www.leads4pass.com/350-601.html, to help you practice real questions easily and pass the exam with 100% success.
What’s more, some free exam questions and answers are shared online from leads4pass 350-601 dumps: https://drive.google.com/file/d/1UvMhK8djWKCBL4_hWnD573zDY19E2QkM/
You can also take the Cisco 350-601 online practice test
| From | Number of exam questions | Exam name | Exam code | Last updated |
| leads4pass | 15 | Implementing and Operating Cisco Data Center Core Technologies (DCCOR) | 350-601 | 350-601 dumps |
Question 1:
An engineer must configure HTTPS secure management for Cisco UCS Manager using a key ring named kr2016 and a key size of 1024 bits. The environment consists of a primary fabric interconnect named UCS-A and a secondary fabric interconnect named UCS-B. Which command sequence must be used to accomplish this goal?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
Question 2:
Refer to the exhibit. An engineer monitors ingress traffic from Host-A and all traffic for VLAN 20 from Host-B. Which configuration must be implemented to monitor and export traffic to Network Analyzer?
A. SW-1(config)# monitor session 5 SW-1(config-monitor)# source interface ethernet 1/2 rx SW-1(config-monitor)# source interface ethernet 1/1 tx SW-1(config-monitor)# source vlan 20 both SW-1(config-monitor)# destination ip 10.10.10.1 SW-1(config-monitor)# no shut
B. SW-1(config)# monitor session 5 type erspan-source SW-1(config-erspan-src)# source interface ethernet 1/2 rx SW-1(config-erspan-src)# source vlan 20 both SW-1(config-erspan-src)# destination ip 10.10.10.1 SW-1(config-erspan-src)# erspan-id 111 SW-1(config-erspan-src)# no shut
C. SW-1(config)# monitor session 5 SW-1(config-monitor)# source interface ethernet 1/2 rx SW-1(config-monitor)# source interface ethernet 1/1 both SW-1(config-monitor)# source vlan 20 both SW-1(config-monitor)# destination interface ethernet 2/1 SW-1(conflg-monitor)# no shut
D. SW-1(config)# monitor session 5 type erspan SW-1(config-erspan-src)# source interface ethernet 1/2 rx SW-1(config-erspan-src)# source interface ethernet 1/1 both SW-1(config-erspan-src)# destination ip 10.10.10.1 SW-1(config-erspan-src)# mtu 1000 SW-1(config-erspan-src)# no shut
Correct Answer: B
Question 3:
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc1/1-12 and then for ports fc1/13-24 for the next 60 seconds. Ports in the range fc1/13-24 were already enabled for analytics.
Which set of commands must be used to meet these requirements?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
Question 4:
An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials. Which protocol must be configured on the switches to allow automated onboarding?
A. SNMP
B. Telnet
C. SSH
D. HTTPS
Correct Answer: D
Question 5:
Refer to the exhibit.
Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?
A. [guestshell@guestshell ~]$ for x in {1..5}; dohost “conf t ; interface eth1/$x ; description Server$x”;
B. [guestshell@guestshell ~]$ for x in {1..5}; do dohost “conf t ; interface eth1/$x ; description Server$x”; done
C. [guestshell@guestshell ~]$ for x in (1..5); do dohost “conf t”; “interface eth1/$x” ; “description Server$x”; done
D. [guestshell@guestshell ~]$ for x in (1..5); dohost “conf t ; interface eth1/$x ; description Server$x”;
Correct Answer: A
Question 6:
DRAG DROP
A network engineer is asked to describe the cloud infrastructure models from the perspective of their operation and access to resources. Drag and drop the descriptions from the left onto the appropriate.
Select and Place:
Correct Answer:
Question 7:
A customer data center is configured for the distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call-home features to be constrained to DC2.
Which two configuration sets must be used to meet these requirements? (Choose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: DE
This is a confusing question actually. But I selected DE because they have “cfs region x”. configuration without keyword region should not be accepted on the switch. Please test that on a Nexus switch. https://www.cisco.com/c/en/us/td/docs/ switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_nx_os_cli/sm_2cfs.html
Question 8:
Refer to the exhibit.
What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?
A. displays the compatibility of the EPLD upgrade and the image in the bootflash
B. shows a simulated upgrade of the EPLD
C. upgrades the EPLD on the switch disruptively
D. displays the impact of the upgrade on the operation of the switch
Correct Answer: D
Question 9:
Which storage protocol reduces file locks by using leasing?
A. CIFS
B. NFS 4
C. NFS 3
D. SMB
Correct Answer: D
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/BRKCOM-1211.pdf
Question 10:
An engineer must implement access control for Cisco UCS Manager. The configuration must meet these requirements.
All users and user groups must be configured using Active Directory. User1 must have full access to the Fabric Interconnect infrastructure and network security operations User1 must have full access to the storage operations configuration.
Which action must be performed on Cisco UCS to meet the requirements?
A. Create a custom rote for the user and RADIUS for the role-mapping for Active Directory.
B. Execute a built-in role for the user and LDAP lor the role-mapping for Active Directory.
C. Create a custom role for the user and LDAP for the rote-mappings for Active Directory.
D. Execute a built-in role for the user and RADIUS for the role-mapping for Active Directory.
Correct Answer: B
Question 11:
Refer to the exhibit.
A user must be granted management access to the Cisco Nexus 9000 Series Switch using AAA servers The RADIUS servers are configured to accept login requests from the same Layer 2 subnet of the switch The user must be permitted to log in with these requirements:
RADIUS server 1 must be used to log in via a console. RADIUS server 2 must be used to log in via SSH.
Which two actions meet these requirements?
A. Enable command authorization to RAD1 and RAD2 for all successful logins.
B. Change the dead timer for RAD1 and RAD2 to 1 minute.
C. Set the RADIUS source interface to be mgmt0 for group RAD1 and VLAN 22 for group RAD2
D. Configure the authentication login to use group RAD1 for the console and group RAD2 for remote access.
Correct Answer: AD
Question 12:
DRAG DROP
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.
Select and Place:
Correct Answer:
Question 13:
Refer to the exhibit.
An engineer must invoke a Python script that alerts the operations team when the router DC-RTR-1 becomes unreachable. Which configuration set accomplishes this task?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
Question 14:
A Cisco Nexus 7000 Series switch runs VXLAN, and interface Ethernet 7/30 is configured as a trunk port. Which command set configures the switch to act as a gateway for VLAN 50?
interface Ethernet7/30 no switchport no shutdown service instance 1 vni no shutdown
A. encapsulation profile VSI_50_TO_500 default
B. encapsulation profile vni VSI_50_TO_500 dot1q 500 vni 50 bridge-domain 500 member vni 50 interface Vlan500 ip address 10.50.50.51/24
C. encapsulation profile vni VSI_50_TO_500 dot1q 500 vni 50 bridge-domain 500 member vni 50 interface Bdi500 jp address 10.50.50.51/24
D. encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500bridge-domain 50 member vni 500 interface Bdi50 ip address 10.50.50.51/24
E. encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500 bridge-domain 50 member vni 500 interface Vlan50 ip address 10.50.50.51/24
Correct Answer: C
Question 15:
Where does the witness VM reside in a Cisco Hyperflex Edge deployment?
A. Windows application
B. Hyper Rex Data Platform
C. Cisco Intersight
D. local HyperFlex datastore
Correct Answer: C
…
Cisco 350-601 dumps are committed to helping all candidates successfully pass the 350-601 DCCOR certification exam!
Use free Cisco 350-601 exam resources to help verify your recent study! You can also download the latest 350-601 dumps: https://www.leads4pass.com/350-601.html (470 Q&A), to help you pass the 350-601 DCCOR certification exam 100% successfully!