We share the latest updated Cisco 300-410 test questions and answers for free, all test questions are real cracked, guaranteed to be true and effective! You can practice the test online! Or download the latest 300-410 exam pdf. The free exam questions are only part of what we share. If you want to get the complete Cisco 300-410 exam questions and answers, you can get them in lead4pass.
The lead4pass 300-410 exam dumps contain VCE dumps and PDF dumps.
Cisco 300-410 Exam “Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)” https://www.lead4pass.com/300-410.html (Total Questions: 563 Q&A)
Article content list:
- Download the Cisco 300-410 exam pdf for free
- Cisco 300-410 exam video from Youtube
- Real questions cracking Cisco 300-410 exam questions practice test
- Get Cisco exam discount code 2021
Download the Cisco 300-410 exam pdf for free
Free share Cisco 300-410 exam PDF from Google Drive provided by Lead4pass
https://drive.google.com/file/d/1wan5JPqmzmlqjHCSo-WeoC_vp_ZV0BBP/
Cisco 300-410 exam video from Youtube
Cisco 300-410 exam practice questions and answers watch learning in youtube
Real questions cracking Cisco 300-410 exam questions practice test
QUESTION 1
Which statement about route distinguishers in an MPLS network is true?
A. Route distinguishers allow multiple instances of a routing table to coexist within the edge router.
B. Route distinguishers are used for label bindings.
C. Route distinguishers make a unique VPNv4 address across the MPLS network.
D. Route distinguishers define which prefixes are imported and exported on the edge router.
Correct Answer: C
QUESTION 2
Which transport layer protocol is used to form LDP sessions?
A. UDP
B. SCTP
C. TCP
D. RDP
Correct Answer: C
LDP multicasts hello messages to a well-known UDP port (646) in order to discover neighbors. Once the discovery is
accomplished, a TCP connection (port 646) is established and the LDP session begins. LDP keepalives ensure the
health of the session. Thanks to the LDP session, LDP messages create the label mappings required for a FEC.
Withdraw messages are used when FECs need to be torn down.
QUESTION 3
Which IGPs are supported by the MPLS LDP autoconfiguration feature?
A. RIPv2 and OSPF
B. OSPF and EIGRP
C. OSPF and ISIS
D. ISIS and RIPv2
Correct Answer: C
QUESTION 4
Refer to the exhibits. Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands
are missing? (Choose two.)
A. The IP nhrp redirect command is missing on the spoke routers.
B. The IP nhrp shortcut command is missing on the spoke routers.
C. The IP nhrp redirect command is missing on the hub router.
D. The IP nhrp shortcut command is missing on the hub router.
E. The IP nhrp map command is missing on the hub router.
Correct Answer: BC
QUESTION 5
Which two statements about redistributing EIGRP into OSPF are true? (Choose two)
A. The redistributed EIGRP routes appear as type 3 LSAs in the OSPF database
B. The redistributed EIGRP routes appear as type 5 LSAs in the OSPF database
C. The administrative distance of the redistributed routes is 170
D. The redistributed EIGRP routes appear as OSPF external type 1
E. The redistributed EIGRP routes as placed into an OSPF area whose area ID matches the EIGRP autonomous
system number
F. The redistributed EIGRP routes appear as OSPF external type 2 routes in the routing table
Correct Answer: BF
QUESTION 6
What is a prerequisite for configuring BFD?
A. Jumbo frame support must be configured on the router that is using BFD.
B. All routers in the path between two BFD endpoints must have BFD enabled.
C. Cisco Express Forwarding must be enabled on all participating BFD endpoints.
D. To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1043332
QUESTION 7
Refer to the exhibit.
A company is evaluating multiple network management system tools. Trending graphs generated by SNMP data are
returned by the NMS and appear to have multiple gaps. While troubleshooting the issue, an engineer noticed the
relevant output.
What solves the gaps in the graphs?
A. Remove the exceed-rate command in the class map.
B. Remove the class-map NMS from being part of control plane policing.
C. Configure the CIR rate to a lower value that accommodates all the NMS tools
D. Separate the NMS class map in multiple class maps based on the specific protocols with appropriate CoPP actions
Correct Answer: D
The class-map NMS in the exhibit did not classify traffic into specific protocols so many packets were dropped. We
should create a class map to classify the receiving traffic. It is also a recommendation of CoPP/CPP policy:
“Developing a CPP policy starts with the classification of the control plane traffic. To that end, the control plane traffic
needs to be first identified and separated into different class maps.”
Reference: https://tools.cisco.com/security/center/resources/copp_best_practices
QUESTION 8
When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not
compatible with template”. What is the reason for the error?
A. The template has an incorrect configuration.
B. The software version of the template is different from the software version of the device.
C. The changes to the template were not committed.
D. The tag that was used to filter the templates does not match the device tag.
Correct Answer: D
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the
templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not
Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-andmanagement/dna-center/1-2-10/user_guide/b_cisco_dna_center_ug_1_2_10/b_dnac_ug_1_2_10_chapter_0111.html
QUESTION 9
Refer to the exhibit.
Which two actions should be taken to access the server? (Choose two.)
A. Modify the access list to add a second line of permit IP any
B. Modify the access list to deny the route to 192.168.2.2.
C. Modify distribute-list seq 10 to permit the route to 192.168.2.2.
D. Add a sequence 20 in the route map to permit access-list 1.
E. Add a floating static route to reach 192.168.2.2 with administrative distance higher than OSPF
Correct Answer: BE
QUESTION 10
Refer to the exhibit. The R1 and R2 configurations are:
The neighbor relationship is not coming up.
Which two sets of configurations bring the neighbors up? (Choose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: DE
QUESTION 11
Refer to the exhibit. Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is
configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for
more than two hours per day. Which action fixes the issue within the current resources?
A. Modify the subnet mask to the network 192.168.1.0 255.255.254.0 command in the DHCP pool
B. Configure the DHCP lease time to a smaller value
C. Configure the DHCP lease time to a bigger value
D. Add the network 192.168.2.0 255.255.255.0 command to the DHCP pool
Correct Answer: B
QUESTION 12
Refer to the exhibit.
An engineer identifier a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch?
A. no spanning-tree uplink fast
B. spanning-tree loopguard default
C. spanning-tree backbone fast
D. spanning-tree portfast bpduguard
Correct Answer: D
Get the latest and complete Cisco Certified Network Associate exam materials! Help you pass the first exam successfully! Click here to learn more…
Get more past Cisco CCNP 300-410 exam questions for your reference
| Updated Time | Exam Questions |
|---|---|
| 2020/5 | cisco CCNP 300-410 exam questions q1-q12 |
| 2020/7 | cisco CCNP 300-410 exam questions q1-q12 |
| 2020/11 | cisco CCNP 300-410 exam questions q1-q12 |
| 2020/12 | cisco CCNP 300-410 exam questions q1-q12 |
| 2021/3 | cisco CCNP 300-410 exam questions q1-q12 |
Get Cisco exam discount code 2021
lead4pass In order to give back to our friends who have supported us for many years, we will share the latest exam discount codes every year
Thank you for reading! I have told you how to successfully pass the Cisco 300-410 exam.
You can choose: https://www.lead4pass.com/300-410.html to directly enter the 300-410 Exam dumps channel! Get the key to successfully pass the exam!
Wish you happiness!
ps.
Get free Cisco 300-410 exam PDF online: https://drive.google.com/file/d/1wan5JPqmzmlqjHCSo-WeoC_vp_ZV0BBP/