We share the latest updated Cisco 200-301 test questions and answers for free, all test questions are real cracked, guaranteed to be true and effective!
You can practice the test online! Or download the latest 200-301 exam pdf.
The free exam questions are only part of what we share. If you want to get the complete Cisco 200-301 exam questions and answers, you can get them in leads4pass.
The leads4pass 200-301 exam dumps contain VCE dumps and PDF dumps.
Cisco 200-301 Exam “Cisco Certified Network Associate” https://www.leads4pass.com/200-301.html (Total Questions: 563 Q&A)
Article content list:
- Download the Cisco 200-301 exam pdf for free
- Cisco 200-301 exam video from Youtube
- Real questions cracking Cisco 200-301 exam questions practice test
- Get Cisco exam discount code 2021
Download the Cisco 200-301 exam pdf for free
Free share Cisco 200-301 exam PDF from Google Drive provided by leads4pass
https://drive.google.com/file/d/1b85tTjYgRMHhj2E1wZe5vbCAQlOaaJsP/
Real questions cracking Cisco 200-301 exam questions practice test
QUESTION 1
Which two actions influence the EIGRP route selection process? (Choose two.)
A. The advertised distance is calculated by a downstream neighbor to inform the local router of the bandwidth on the
link.
B. The router calculates the feasible distance of all paths to the destination route.
C. The router must use the advertised distance as the metric for any given route.
D. The router calculates the best backup path to the destination route and assigns it as the feasible successor.
E. The router calculates the reported distance by multiplying the delay on the exiting interface by 256.
Correct Answer: BD
The reported distance (or advertised distance) is the cost from the neighbor to the destination. It is calculated from the
router advertising the route to the network. For example in the topology below, suppose router A and B are exchanging
their routing tables for the first time. Router B says “Hey, the best metric (cost) from me to IOWA is 50 and the metric
from you to IOWA is 90” and advertises it to router A. Router A considers the first metric (50) as the Advertised
distance. The second metric (90), which is from NEVADA to IOWA (through IDAHO), is called the Feasible distance. 
The reported distance is calculated in the same way of calculating the metric. By default (K1 = 1, K2 = 0, K3 = 1, K4 = 0,
K5 = 0), the metric is calculated as follows:
A feasible successor is a backup route. To be a feasible successor, the route must have an Advertised distance (AD)
less than the Feasible Distance (FD) of the current successor route.
Feasible Distance (FD): The sum of the AD plus the cost between the local router and the next-hop router. The router
must calculate the FD of all paths to choose the best path to put into the routing table.
Note: Although the new CCNA exam does not have an EIGRP topic you should learn the basic knowledge of this
routing protocol.
QUESTION 2
You are configuring your edge router’s interface with a public IP address for Internet connectivity. The router needs to
obtain the IP address from the service provider dynamically. Which command is needed on interface FastEthernet 0/0 to
accomplish this?
A. IP default-gateway
B. IP route
C. IP default-network
D. IP address DHCP
E. IP address dynamic
Correct Answer: D
QUESTION 3
Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?
A. The address is removed from the pool until the conflict is resolved.
B. The address remains in the pool until the conflict is resolved.
C. Only the IP detected by Gratuitous ARP is removed from the pool.
D. Only the IP detected by Ping is removed from the pool.
E. The IP will be shown, even after the conflict is resolved.
Correct Answer: A
An address conflict occurs when two hosts use the same IP address. During address assignment, DHCP checks for
conflicts using ping and gratuitous ARP. If a conflict is detected, the address is removed from the pool. The address will
not be assigned until the administrator resolves the conflict.
QUESTION 4
Which value is used to determine the active router in an HSRP default configuration?
A. Router loopback address
B. Router IP address
C. Router priority
D. Router tracking number
Correct Answer: B
Q. If there is no priority configured for a standby group, what determines which router is active?
A. The priority field is used to elect the active router and the standby router for the specific group. In the case of an
equal priority, the router with the highest IP address for the respective group is elected as active. Furthermore, if there
are more than two routers in the group, the second-highest IP address determines the standby router, and the other
router/routers are in the listen to state.
QUESTION 5
Which statement about Link Aggregation when implementing on a Cisco Wireless LAN Controller is true?
A. The EtherChannel must be configured in “mode active”.
B. When enabled, the WLC bandwidth drops to 500 Mbps.
C. To pass client traffic, two or more ports must be configured.
D. One functional physical port is needed to pass client traffic.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/configguide/b_cg82/b_cg82_chapter_010101011.html
QUESTION 6
How does Cisco DNA Center gather data from the network?
A. Devices use the call-home protocol to periodically send data to the controller
B. Devices establish an IPsec tunnel to exchange data with the controller
C. The Cisco CLI Analyzer tool gathers data from each licensed network device and streams it to the controller
D. Network devices use different services like SNMP, Syslog, and streaming telemetry to send data to the controller
Correct Answer: D
QUESTION 7
An engineer needs to configure LLDP to send the port description time length value (TLV). What command sequence
must be implemented?
A. switch#lldp port-description
B. switch(config)#lldp port-description
C. switch(config-line}#lldp port-description D. switch(config-if)#lldp port-description
Correct Answer: B
QUESTION 8
Refer to the exhibit. When running EIGRP, what is required for RouterA to exchange routing updates with RouterC?
A. AS numbers must be changed to match on all the routers
B. Loopback interfaces must be configured so a DR is elected
C. The no auto-summary command is needed on Router A and Router C
D. Router B needs to have two network statements, one for each connected network
Correct Answer: A
This question is to examine the understanding of the interaction between EIGRP routers. The following information must
be matched so as to create neighborhood. EIGRP routers to establish, must match the following information:
1.
AS Number;
2.
K-value.
QUESTION 9
Refer to the exhibit. A packet is being sent across router R1 to host 172.16.3.14. To which destination does the router
send the packet?
A. 207.165.200.246 via Serial0/1/0
B. 207.165.200.254 via Serial0/0/0
C. 207.165 200.254 via Serial0/0/1
D. 207.165.200.250 via Serial0/0/0
Correct Answer: C
QUESTION 10
Which action is taken by switch port enabled for PoE power classification override?
A. If a monitored port exceeds the maximum administrative value for power, the port is shut down and err-disabled.
B. When a powered device begins drawing power from a PoE switch port, a Syslog message is generated.
C. As power usage on a PoE switch port is checked, data flow to the connected device is temporarily paused.
D. If a switch determines that a device is using less than the minimum configured power, it assumes the device has
failed and disconnects it.
Correct Answer: A
PoE monitoring and policing compare the power consumption on ports with the administrative maximum value (either a
configured maximum value or the port\\’s default value). If the power consumption on a monitored port exceeds the
administrative maximum value, the following actions occur:
-A Syslog message is issued.
–
The monitored port is shut down and error-disabled.
–
The allocated power is freed.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/power_over_ethernet.pdf
QUESTION 11
Refer to the exhibit. If R1 receives a packet destined to 172.16.1.1, to which IP address does it send the packet?
A. 192.168.14.4
B. 192.168.12.2
C. 192.168.13.3
D. 192.168.15.5
Correct Answer: A
QUESTION 12
Refer to the exhibit. An engineer is configuring the New Your router to reach the Lo1 interface of the Atlanta router using
interface Se0/0/0 as the primary path. Which two commands must be configured on the New York router so that it can
reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down?
(Choose two.)
A. Ipv6 route 2000::1/128 2012::1
B. Ipv6 route 2000::1/128 2012::1 5
C. Ipv6 route 2000::1/128 2012::2
D. Ipv6 route 2000::1/128 2023::2 5
E. Ipv6 route 2000::1/128 2023::3 5
Correct Answer: AE
Floating static routes are static routes that have an administrative distance greater than the administrative distance (AD)
of another static route or dynamic routes. By default a static route has an AD of 1 then the floating static route must have
an AD greater than 1. Floating static route has a manually configured administrative distance greater than that of the
primary route and therefore would not be in the routing table until the primary route fails.
QUESTION 13
Refer to the exhibit.
A network administrator has been tasked with securing VTY access to a router Which access-list entry accomplishes
this task?
A. access-list 101 permit tcp 10.1.10 0.0.0.255 172.16.10 0.0.0.255 eq ssh
B. access-list 101 permit tcp 10.11.0 0.0.0.255 172.16.10 0.0.0.255 eq scp
C. access-list 101 permit tcp 10.11.0 0.0.0.255 172.16.10 0.0.0.255 eq telnet
D. access-list 101 permit tcp 10.1.10 0.0.0.255 172.16.10 0.0.0.255 eq https
Correct Answer: A
Get the latest and complete Cisco Certified Network Associate exam materials! Help you pass the first exam successfully! Click here to learn more…
Get Cisco exam discount code 2021
leads4pass In order to give back to our friends who have supported us for many years, we will share the latest exam discount codes every year
Thank you for reading! I have told you how to successfully pass the Cisco 200-301 exam.
You can choose: https://www.leads4pass.com/200-301.html to directly enter the 200-301 Exam dumps channel! Get the key to successfully pass the exam!
Wish you happiness!
ps.
Get free Cisco 200-301 exam PDF online: https://drive.google.com/file/d/1b85tTjYgRMHhj2E1wZe5vbCAQlOaaJsP/