To pass the Cisco 010-151 exam, you need to have skills in the following areas: basic Cisco NX-OS configuration, Cisco data center products, and hardware components, with an emphasis on Cisco Unified Computing System (UCS).
Want to pass the Cisco 010-151 exam? You only need to practice the exam and get a complete Cisco 010-151 dumps, 100% guaranteed to pass the exam. The complete 010-15 dumps path is https://www.leads4pass.com/010-151.html.
Cisco CCT certification is one of the popular Cisco certifications. Before taking the exam, you should know some basic exam information. For example: What is the exam like? How do I pay for the exam? How do I schedule the exam? What happens after I pass the exam? Will the certification exam expire?
You can view the above content here https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/dctech.html#~faqs.
Keep reading, you should take part in this online practice test!
[2022 Updated] 010-151 Dumps exam questions and answers
Question 1:
Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?
A. routing
B. tunneling
C. handshaking
D. transporting
Correct Answer: B
Question 2:
Which fiber optic cable type is used most often with a Subscriber connector?
A. dual-mode
B. single-mode
C. straight-mode
D. multi-mode
E. subscriber-mode
Correct Answer: B
Question 3:
Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?
A. any-to-many
B. many-to-any
C. any-to-any
D. any-to-one
E. one-to-any
F. one-to-one
Correct Answer: C
Question 4:
Which two statements about PCIe are true? (Choose two.)
A. The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.
B. You can install a PCI Express x8 adapter into an x4 slot.
C. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.
D. The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.
E. A link that is composed of four lanes is called an x4 link.
Correct Answer: AE
Question 5:
Where do you find the model number of a Cisco MDS 9200 Series chassis?
A. on the top front of the chassis next to the serial number
B. on the bottom front of the chassis next to the Cisco logo
C. on the top front of the chassis next to the Cisco logo
D. on the bottom front of the chassis next to the serial number
Correct Answer: C
[2022 Updated]: Take the latest Cisco 010-151 exam practice for 2022 and access more exam questions and answers to help you improve your skills.
Cisco 010-151 online practice test
The answer is at the end of the article
QUESTION 1
Which two provide connectivity to Fabric Extenders? (Choose two.)
A. UCS 6300 series
B. UCS B-Series Servers
C. UCS 6400 series
D. UCS S-Series Storage Servers
E. UCS E-Series Servers
QUESTION 2
Where do you find the model number of a Cisco MDS 9200 Series chassis?
A. on the top front of the chassis next to the serial number
B. on the bottom front of the chassis next to the Cisco logo
C. on the top front of the chassis next to the Cisco logo
D. on the bottom front of the chassis next to the serial number
QUESTION 3
Which two statements about Cisco UCS S3260 Storage Server are true? (Choose two.)
A. AMD EPYC 7000 series processors, with up to 32 cores per socket
B. Up to 1 TB of Intel Optane DC Persistent Memory
C. It is in a compact 2-RU form factor.
D. Support for the Cisco 12-G 9460-8i PCle SAS RAID controller
E. Massive 840-TB data storage capacity
Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-s-series-storageservers/s3260-specsheet.pdf
QUESTION 4
Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?
A. first-generation supervisor module
B. second-generation supervisor module (Sup2)
C. second-generation supervisor enhanced module (Sup2E)
D. third-generation supervisor enhanced module (Sup3E)
QUESTION 5
The Ethernet specification details several different fiber optic media types.
What is the wire transmission speed for 100BASE-FX Ethernet?
A. 10 Mb/s
B. 100 Mb/s
C. 1000 Mb/s
D. 10000 Mb/s
QUESTION 6
What do the small form-factor, x86 64-bit blade servers reside in the Cisco branch-office router?
A. Cisco UCS E-Series Servers
B. Cisco UCS S-Series Storage Servers
C. Cisco UCS Blade Servers
D. Cisco UCS C-Series Rack-Mount Servers
Reference: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-e-series-servers/datasheetc78-737706.pdf page 3
QUESTION 7
Which statement is true about cloud computing?
A. It provides self-service, on-demand provisioning, and billing for corporate users only.
B. Users usually own and maintain their own IT infrastructure and facility.
C. It provides end-to-end server, application network service, and storage virtualization.
D. It increases the total cost of ownership.
QUESTION 8
Which three statements about FCoE are true? (Choose three.)
A. Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.
B. Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.
C. Increases capital costs due to the difficulty to manage.
D. Consolidates I/O traffic in the data center.
QUESTION 9
If the Overall Status for a Cisco UCS B-Series Blade Server indicates a failure in the Cisco UCS Manager, such as discovery-failed, which statement is true?
A. The server shuts down.
B. The server automatically reboots in 3 minutes.
C. The endpoints on that server cannot be upgraded.
D. The server is online, but the administrator cannot assign a service profile to that blade.
QUESTION 10
During the auto-sync firmware upgrade process, what should be your initial input entered once the Fabric Interconnect boots up?
A. console
B. GUI
C. upgrade firmware
D. auto-sync
QUESTION 11
Which two statements are true for the Ethernet 802.3 standard? (Choose two.)
A. An 802.3 Ethernet frame is 68 to 1518 bytes in length.
B. CSMA/CD eliminates collisions for the switched LAN where multiple collision domains reside.
C. It defines physical layer and data link layer protocols.
D. The IEEE 802.3ab standard defines 10 Gigabit Ethernet over unshielded twisted-pair (UTP).
E. Network layer protocol is carried in the payload field.
QUESTION 12
Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true? (Choose three.)
A. Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode.
B. Power status LED. Green indicates that the server is in main power mode and can be safely powered off.
C. Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED.
D. Disconnect the power cords from the power supplies in your server to completely power off the server.
E. Only an emergency shutdown can be performed using the power button on the server front panel.
F. The Cisco UCS C-Series Rack-Mount Server has only one power mode.
QUESTION 13
Refer to the exhibit.
Which item does A represent?
A. Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
B. Virtual Interface Card for Cisco UCS B420 M3 Blade Servers
C. mLOM for Cisco UCS B420 M3 Blade Servers
D. Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
E. SuperCap module for Cisco UCS B420 M3 Blade Servers
QUESTION 14
DRAG DROP
Refer to the exhibit. Match the Fault Icons to the appropriate description.
Select and Place:
Correct Answer:
QUESTION 15
Refer to the exhibit. Which item does C represent?
A. Pin icon (prevents Navigation pane from sliding)
B. Icon to view the Navigation pane
C. Favorite Icon (make any specific work pane in the application as your favorite)
D. Index Icon (view listing in alphabetical order)
Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/4_1/b_Cisco_UCS_Cseries_GUI_Configuration_Guide_41/b_Cisco_UCS_C-series_GUI_Configuration_Guide_41_chapter_01.html
Verify answer:
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
| AC | C | DE | C | B | A | C | ABD | C | A | BC | ACD | C | IMAGE | C |
PS.Cisco 010-151 Exam PDF
Everyone: Thank you for reading. The above shared how to pass the Cisco 010-151 exam.
Get the complete Cisco 010-151 dumps: https://www.leads4pass.com/010-151.html. Ensure that the first exam is passed smoothly.
Like, please bookmark and share!